Woodpeckers Router Table System 1

Introducing Woodpeckers newest router table; the 24 x 32 Precision Router Table. Taking advantage of our 15 years of manufacturing experiences, we've taken this MDF router table to a whole new level. This unit is predrilled for the listed routers below. (only)

Top 

• 32" x 23 1/2" x 1 1/4"
• Micro Dot Laminate over MDF core
• Combination Miter track and T-track channel (1 piece)
• 2 Embeded Fence Tracks
• Laminated bottom

Insert

• Phenolic Mounting Plate
• Pre Drilled for  Porter Cable models 690, 890, 7529 and 8529 Makita 1101, and Bosch Models 1617, 1618 series
• Measures 11 3/4" x 9 1/4" x 3/8"
• 3 Twist Lock Rings with 2 5/8", 1", 1 3/16" openings
• Spanner ring wrench and starter pin

Fence

• 32" LE Fence
• Aluminum Core with Micro Adjust
• 15 3/4" x 6" Extensions, Laminated MDF
• Dust Port, 2 1/4" Internal diameter
• Saftey Cover
• Black Knob and bolt assemblies to ride in fence track

Stand

• 27" x 19" x 32"
• Easy Assembly
• Steel
• threaded insert kit

Woodpecker top does not come predrilled for a stand.  This table comes with four threaded inserts and bolts for easy attachement.  (see the directions page for this)

Assembly directions

From the Manufacturer

Building on the flatness advantages of MDF, the Woodpeckers Precision Router Table features a lower friction “Micro-Dot” laminate, a bolted in combination T-miter channel / T-track and two embedded fence tracks.

The new Micro-Dot laminate product from Formica greatly reduces the drag from sliding wood over the table top. A continuous pattern of small dimples serve to decrease the contact area between the work piece and work surface. Decreased contact area results in lower friction.

Our new tables also feature an anodized aluminum combination T-Miter Channel / T-track which is bolted in from underneath making it extremely resistant to pull-out when using feather boards or other types of clamps. This attachment technique also makes it very easy to replace the channel if necessary.

Two embedded, anodized aluminum tracks are spaced on 17” centers to accommodate Woodpeckers LE or Super Fence.

Like all Woodpeckers router tables, the table is laminated on both sides with a full thickness, horizontal grade laminate, pressed in a fifty ton press, heated for four hours to stabilize the panel and machined in a CNC router to achieve tight tolerance features.

Table size is 23-1/2 x 31-1/2 x 1-3/8 thick with the router opening centered length wise and offset back approximately 13” from the front. The plate opening is a standard 9-1/4 x 11-3/4, 3/8 deep with 3/4 radiused corners. The support lip has eight leveling screws to set the router plate flush with the table surface. All outside edges are sealed with PVC edge banding.