Home > Tablesaw Extensions > Final Cut 10" Saw Blade

Final Cut 10" Saw Blade

Final Cut 10" Saw Blade

The latest in saw blade technology!

Let's face it, most woodworkers hate to sand. Sanding is just one of those necessary evils. Many of us do not realize that if we make careful cuts and set up our saws correctly we still can come out with some rough edges. The final cut saw blade does two things very well, it cuts your wood and sands the stock while doing it.

The great part about these blades is that you can buy the refill packs to refresh the blade and get the best sanding results all the time.

Everyone in this industry has been taught that the more teeth a blade has the better the cut is, Final Cut discs do not rely on the teeth to finish the cut so the number of teeth can be greatly reduced. The abrasive disc is actually wider than the blade kerf therefore the stock is cut by the blade and sanded by the disc.

Fully patented and proven successful in cutting and sanding your work piece all at one time. Use with table saw and power miter boxes for the perfect joint or finished edge. No edge sanding is required after passing your work piece through the table saw and when making miters the joints virtually disappear. Make minor length adjustments by simply sliding the work piece towards the rotating blade (just like a disc sander). One operation produces two functions. Try it and see for your self how easy it is to make the ultimate cut with Final Cut blades.

product features

Step-saving blade "no sanding required"
Kick-back is greatly reduced
Eliminates binding of saw blade
The blade does not heat up
Precision cutting of joints�every time
Designed for cross cuts and rips on soft and hard materials
Completes two jobs at one time�Removes the kerf marks and creates the ultimate finished cut producing a smooth sanded finish at the initial pass
Can be used on Miter Saw, Table Saw, and Radial Arm Saw
Abrasive discs are used on both sides of blade for double sided sanded finish
Disc can be trimmed to fit any size blade using standard scissors
Replace disc when the perimeter appears burnt, the sanded finish is not smooth or disc becomes loose

The Final Cut Discs are not designed to work with all blades; however, if you have a blade that meets the following specifications you will most likely see good results! The specifications are: Plate Thickness of 0.070 and Kerf Thickness of 0.104.

Easy installation instructions for replacement disc

Clean blade with lacquer thinner
Wash blade with soapy water and dry blade
Insert Universal Centering Tool in Blade
Remove protective backing from abrasive disc and apply mist coat of 3M Super 77 adhesive to disc. Place disc on blade and using the protective backing from disc cover top of disc and apply pressure to adhere disc to blade.
To remove wore disc apply lacquer thinner to disc and peel off
For best results, make sure abrasive discs extend through stock being cut